CNC Rotary Table - Hydraulic System
Exclusive 3-pieces coupling

MINC-255    MINC-400
MINC-320    MINC-500A

CNC INDEX TABLE

  • Worktable diameter 255, 320, 400 mm (Vertical & horizontal applications)
  • CNC gear coupling rotary table
  • Exclusive 3-piece coupling suits heavy duty machining.
  • Indexing accuracy +5 / -5 seconds.
  • Hydraulic braking system.
  • Minimum indexing angle 1° or 5°
Item instruction
  • MINC-255/255N
  • MINC-320/320N
  • MINC-400/400N
  • MINC-500A
MINC-255.jpg
Specifications / Model Explanation Unit MINC-255/255N
Worktable Diameter Ømm Ø255
Table Height Horizontal mm 195
Center Height Vertical mm 160
Center Bore Diameter Ømm Ø40H7
Through-Hole Diameter Ømm Ø33
Width Of T-Slot mm 12H7
Width Of Guide Block mm 18H7
Indexing angle deg. 1° or 5°
Indexing Accuracy sec. ±5"
Repeatability sec. ±1"
Servo Motor
(Model As Required)
FANUC   αiF 4
MELDAS   HF-104T
Speed Reduction Ratio   1/120
Table Rotation Speed r.p.m 33.3
Allowable Turntable Torque kg-m 250
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 300
Allowable Load
Capacity
Vertical  kg  125
Horizontal 300
Tail-Stock Used 300
Net Weight (Motor Excluded) kg 115
Note:
1. Choice of connector location at side, top or back of the rotary table.
2. "N" means shortened motor cover, please contact us for shortening drawing if necessity.
MINC-320
Specifications / Model Explanation Unit MINC-320/320N
Worktable Diameter Ømm Ø320
Table Height Horizontal mm 250
Center Height Vertical mm 210
Center Bore Diameter Ømm Ø100H7
Through-Hole Diameter Ømm Ø80
Width Of T-Slot mm 14H7
Width Of Guide Block mm 18H7
Indexing angle deg. 1° or 5°
Indexing Accuracy sec. ±5"
Repeatability sec. ±1"
Servo Motor
(Model As Required)
FANUC   αiF 8
MELDAS   HF-154S
Speed Reduction Ratio   1/120
Table Rotation Speed r.p.m 25
Allowable Turntable Torque kg-m 350
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 400
Allowable Load
Capacity
Vertical  kg  175
Horizontal 350
Tail-Stock Used 350
Net Weight (Motor Excluded) kg 205
Note:
1. Choice of connector location at side, top or back of the rotary table.
2. "N" means shortened motor cover, please contact us for shortening drawing if necessity.
MINC-400
Specifications / Model Explanation Unit MINC-400/400N
Worktable Diameter Ømm Ø400
Table Height Horizontal mm 260
Center Height Vertical mm 255
Center Bore Diameter Ømm Ø120H7
Through-Hole Diameter Ømm Ø80
Width Of T-Slot mm 14H7
Width Of Guide Block mm 18H7
Indexing angle deg. 1° or 5°
Indexing Accuracy sec. ±5"
Repeatability sec. ±1"
Servo Motor
(Model As Required)
FANUC   αiF 12
MELDAS   HF-204S
Speed Reduction Ratio   1/120
Table Rotation Speed r.p.m 25
Allowable Turntable Torque kg-m 450
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 500
Allowable Load
Capacity
Vertical  kg  250
Horizontal 500
Tail-Stock Used 500
Net Weight (Motor Excluded) kg 355
Note:
1. Choice of connector location at side, top or back of the rotary table.
2. "N" means shortened motor cover, please contact us for shortening drawing if necessity.
MINC-500A
Specifications / Model Explanation Unit MINC-500A
Worktable Diameter Ømm Ø500
Table Height Horizontal mm 290
Center Height Vertical mm 310
Center Bore Diameter Ømm Ø120H7
Through-Hole Diameter Ømm Ø121
Width Of T-Slot mm 18H7
Width Of Guide Block mm 18H7
Indexing angle deg. 1° or 5°
Indexing Accuracy sec. ±5"
Repeatability sec. ±1"
Servo Motor
(Model As Required)
FANUC   αiF 12
MELDAS   HF-204S
Speed Reduction Ratio   1/180
Table Rotation Speed r.p.m 16.6
Allowable Turntable Torque kg-m 460
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 650
Allowable Load
Capacity
Vertical  kg  400
Horizontal 700
Tail-Stock Used 700
Net Weight (Motor Excluded) kg 380
Note:
1. Choice of connector location at side, top or back of the rotary table.
2. "N" means shortened motor cover, please contact us for shortening drawing if necessity.