## TRNC-321 TRNC-500A

TRNC-A400 TRNC-650A

# CNC ROTARY TABLE (5 AXIS)

- Servo motor position is not changed with shaft tilting to prevent vibration while cutting.
- Absolute value motor are recommended for tilting axis.

Item instruction

- TRNC-321
- TRNC-A400
- TRNC-500A
- TRNC-650A

Specifications / Model Explanation | Unit | TRNC-321 | ||
---|---|---|---|---|

Worktable Diameter | Ømm | Ø320 | ||

Table Height | Horizontal | mm | 350 | |

Center Height | 90° | mm | 255 | |

Overall Height | 90° | mm | 445 | |

Center Bore Diameter | Ømm | Ø100^{H7} |
||

Through-Hole Diameter | Ømm | Ø100 | ||

Width Of T-Slot | mm | 14^{H7} |
||

Width Of Guide Block | mm | 18^{H7} |
||

Allowable Workpiece Diameter | Ømm | Ø320 | ||

Tilting Angle | deg. | ±110° | ||

Axis | Rotation | Inclination | ||

Minimum Input Increment | deg. | 0.001° | ||

Indexing Accuracy | sec. | 15"★15" | 60"★20" | |

Repeatability | sec. | 4" | － | |

Servo Motor (Model As Required) | FANUC | aiF 8 | αiF 12 | |

MELDAS | HF-154S | HF-204S | ||

Speed Reduction Ratio | 1:120 | 1:360 | ||

Table Rotation Speed | r.p.m | 25 | 8.3 | |

Allowable Inertia Force | kg-cm-sec^{2} |
26 | ||

Allowable Turntable Torque | kg-m | 26 | ||

Drive Pressure / Method | kg/cm^{2} |
5 / Pneumatic | 5 / Pneumatic | |

Clamping Torque | kg-m | ◎130 | ◎258 | |

Allowable Load Capacity | 0° | kg | 200 | |

0°~90° | 100 | |||

Net Weight (Motor Excluded) | kg | 450 |

- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.

2. "◎" Means With built-in Pneumatic/Hydraulic converter.

Specifications / Model Explanation | Unit | TRNC-A400 | ||
---|---|---|---|---|

Worktable Diameter | Ømm | Ø400 | ||

Table Height | Horizontal | mm | 440 | |

Center Height | 90° | mm | 440 | |

Overall Height | 90° | mm | 690 | |

Center Bore Diameter | Ømm | Ø180^{H7} |
||

Through-Hole Diameter | Ømm | Ø180 | ||

Width Of T-Slot | mm | 14^{H7} |
||

Width Of Guide Block | mm | 18^{H7} |
||

Allowable Workpiece Diameter | Ømm | Ø400 | ||

Tilting Angle | deg. | ±110° | ||

Axis | Rotation | Inclination | ||

Minimum Input Increment | deg. | 0.001° | ||

Indexing Accuracy | sec. | 15" | 60" ★20" | |

Repeatability | sec. | 4" | － | |

Servo Motor (Model As Required) | FANUC | αiF 12 | αiF 12 | |

MELDAS | HF-204S | HF-354S | ||

Speed Reduction Ratio | 1:120 | 1:180 | ||

Table Rotation Speed | r.p.m | 25 | 16.6 | |

Allowable Inertia Force | kg-cm-sec^{2} |
61 | ||

Allowable Turntable Torque | kg-m | 30 | ||

Drive Pressure / Method | kg/cm^{2} |
35 / Hydraulic | 35 / Hydraulic | |

Clamping Torque | kg-m | 110 | 170 | |

Allowable Load Capacity | 0° | kg | 250 | |

0°~90° | 125 | |||

Net Weight (Motor Excluded) | kg | 1300 |

- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.

2. "◎" Means With built-in Pneumatic/Hydraulic converter.

Specifications / Model Explanation | Unit | TRNC-500A | ||
---|---|---|---|---|

Worktable Diameter | Ømm | Ø500 | ||

Table Height | Horizontal | mm | 520 | |

Center Height | 90° | mm | 570 | |

Overall Height | 90° | mm | 780 | |

Center Bore Diameter | Ømm | Ø50^{H7} |
||

Through-Hole Diameter | Ømm | - | ||

Width Of T-Slot | mm | 18^{H7} |
||

Width Of Guide Block | mm | 18^{H7} |
||

Allowable Workpiece Diameter | Ømm | Ø500 | ||

Tilting Angle | deg. | -30°~+110° | ||

Axis | Rotation | Inclination | ||

Minimum Input Increment | deg. | 0.001° | ||

Indexing Accuracy | sec. | 15" (Gear) ★20" (Belt) |
★20" (Belt) | |

Repeatability | sec. | 4" | － | |

Servo Motor (Model As Required) | FANUC | αiF 12 | αiF 30 | |

MELDAS | HF-354S | HF-703S | ||

Speed Reduction Ratio | 1:120 | 1:120 | ||

Table Rotation Speed | r.p.m | 25 | 25 | |

Allowable Inertia Force | kg-cm-sec^{2} |
204 | ||

Allowable Turntable Torque | kg-m | 78 | ||

Drive Pressure / Method | kg/cm^{2} |
35 / Hydraulic | 35 / Hydraulic | |

Clamping Torque | kg-m | 250 | 450 | |

Allowable Load Capacity | 0° | kg | 300 | |

0°~90° | 200 | |||

Net Weight (Motor Excluded) | kg | 2300 |

- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.

2. "◎" Means With built-in Pneumatic/Hydraulic converter.

Specifications / Model Explanation | Unit | TRNC-650A | ||
---|---|---|---|---|

Worktable Diameter | Ømm | Ø650 | ||

Table Height | Horizontal | mm | 300 | |

Center Height | 90° | mm | 350 | |

Overall Height | 90° | mm | 622.5 | |

Center Bore Diameter | Ømm | Ø50^{H7} |
||

Through-Hole Diameter | Ømm | - | ||

Width Of T-Slot | mm | 18^{H7} |
||

Width Of Guide Block | mm | -^{} |
||

Allowable Workpiece Diameter | Ømm | Ø500 | ||

Tilting Angle | deg. | -100°~+110° | ||

Axis | Rotation | Inclination | ||

Minimum Input Increment | deg. | 0.001° | ||

Indexing Accuracy | sec. | ★20" (Belt) | ★20" (Belt) | |

Repeatability | sec. | 4" | － | |

Servo Motor (Model As Required) | FANUC | aiF 12 | aiF 30 | |

MELDAS | HF-354S | HF-703S | ||

Speed Reduction Ratio | 1:120 | 1:120 | ||

Table Rotation Speed | r.p.m | 25 | 25 | |

Allowable Inertia Force | kg-cm-sec^{2} |
204 | ||

Allowable Turntable Torque | kg-m | 78 | ||

Drive Pressure / Method | kg/cm^{2} |
35 / Hydraulic | 35 / Hydraulic | |

Clamping Torque | kg-m | 250 | 450 | |

Allowable Load Capacity | 0° | kg | 300 | |

0°~90° | 200 | |||

Net Weight (Motor Excluded) | kg | 1220 |

- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.

2. "◎" Means With built-in Pneumatic/Hydraulic converter.