CNC Rotary Table - Pneumatic System
Employs high precision cross roller bearings

VRNC-125L
VRNC-170L
VRNC-210L

CNC Rotary Table

  • Worktable diameter 125, 170,210 mm
  • Motor is mounted at left.(vertical and Horizontal applications)
  • Employs high precision cross roller bearings
  • Exclusive dual lead worm drive.
  • Air operated.
Item instruction
  • VRNC-125L
  • VRNC-170L
  • VRNC-210L
VRNC-125L
Specifications / ModelExplanation Unit VRNC-125L
Worktable Diameter Ømm Ø125
Table Height Horizontal mm 152
Center Height Vertical mm 110
Center Bore Diameter Ømm Ø25H7
Through-Hole Diameter Ømm Ø13
Width Of T-Slot mm 12H7
Width Of Guide Block mm 14H7
Minimum Input Increment deg. 0.001°
Indexing Accuracy sec. 40"
Repeatability sec. 4"
Servo Motor
(Model As Required)
FANUC   aiF 2
MELDAS   HF-75T
Speed Reduction Ratio   1/90
Table Rotation Speed r.p.m 44.4
Allowable Inertia Force kg-cm-sec2 2
Allowable Turntable Torque kg-m 8.5
Drive Pressure / Method kg/cm2 5 / Pneumatic
Clamping Torque kg-m 8
Allowable Load Capacity Vertical kg 50
Horizontal 100
With Tail-Stock 100
Net Weight (Motor Excluded) kg 40
Note:
1. Choice of connector location at side, top or back of the rotary table.
2. The length of servo motor guard plate varies with dierent servo motors.
VRNC-170L
Specifications / ModelExplanation Unit VRNC-170L
Worktable Diameter Ømm Ø170
Table Height Horizontal mm 152
Center Height Vertical mm 135
Center Bore Diameter Ømm Ø35H7
Through-Hole Diameter Ømm Ø35
Width Of T-Slot mm 12H7
Width Of Guide Block mm 18H7
Minimum Input Increment deg. 0.001°
Indexing Accuracy sec. 20"
Repeatability sec. 4"
Servo Motor
(Model As Required)
FANUC   aiF 4
MELDAS   HF-104T
Speed Reduction Ratio   1/90
Table Rotation Speed r.p.m 44.4
Allowable Inertia Force kg-cm-sec2 4.9
Allowable Turntable Torque kg-m 15
Drive Pressure / Method kg/cm2 5 / Pneumatic
Clamping Torque kg-m 8
Allowable Load Capacity Vertical kg 75
Horizontal 150
With Tail-Stock 150
Net Weight (Motor Excluded) kg 46
Note:
1. Choice of connector location at side, top or back of the rotary table.
2. The length of servo motor guard plate varies with dierent servo motors.
VRNC-210L
Specifications / ModelExplanation Unit VRNC-210L
Worktable Diameter Ømm Ø210
Table Height Horizontal mm 152
Center Height Vertical mm 160
Center Bore Diameter Ømm Ø45H7
Through-Hole Diameter Ømm Ø45
Width Of T-Slot mm 12H7
Width Of Guide Block mm 18H7
Minimum Input Increment deg. 0.001°
Indexing Accuracy sec. 20"
Repeatability sec. 4"
Servo Motor
(Model As Required)
FANUC   aiF 4
MELDAS   HF-104T
Speed Reduction Ratio   1/90
Table Rotation Speed r.p.m 44.4
Allowable Inertia Force kg-cm-sec2 4.9
Allowable Turntable Torque kg-m 15
Drive Pressure / Method kg/cm2 5 / Pneumatic
Clamping Torque kg-m 16
Allowable Load Capacity Vertical kg 75
Horizontal 150
With Tail-Stock 150
Net Weight (Motor Excluded) kg 55
Note:
1. Choice of connector location at side, top or back of the rotary table.
2. The length of servo motor guard plate varies with dierent servo motors.